[

Преглед на асортимента : инструменти за рязане на метали : Инструменти за рязане : Платна за рязане

Биметални Отрезни Ленти

M 42 UNIVERSAL

professional for thin and medium wall thickness

УВЕЛИЧИ КАРТИНКАТА	Употреба: Profiles with thin or medium wall thickness Short-chipping material profiles of non- ferrous metals single and bundle cuts tubes and structurals with light or medium walls sheet metal on vertical band saw machines Характеристика: tooth tops from material HSS M42, DIN 1.3247 variable TPI with 0° rake angle with a special group-set cuts even lightest sections with less vibrations short chipping materials are cut without a problem long life and low cost cutting	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	5/8	6/10	8/12	10/14
6 x 0,90	1/4 x 0,035				V-O
10 x 0,90	3/8 x 0,035				V-O
13 x 0,65	1/2 x 0,025		V-O	V-O	V-O
13 x 0,90	1/4 x 0,035		V-O	V-O	V-O
20 x 0,90	3/4 x 0,035	V-O	V-O	V-O	V-O
27 x 0,90	11/16 x 0,035	V-O	V-O	V-O	V-O
34 x 1,10	13/8 x 0,042	V-O	V-O	V-O	V-O
41 x 1,30	13/8 x 0,50	V-O	V-O

Legend: V-O - variable teeth

нагоре

M 42 MASSIVE

strong in cutting medium and large sections

УВЕЛИЧИ КАРТИНКАТА	Употреба: common steel qualities up to 1400 N/mm² non- ferrous metals single and bundle cuts solid material of medium to large dimensions heavy wall tubes Характеристика: tooth tops from material HSS M42, DIN 1.3247 variable teeth with a positive rake angle with a special group-set cut solid materials as well as heavy wall structurals and tubing at fast cutting rates, with a smooth surface hardness up to 68 HRC	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	0,75/1,25	1/2	2/3	3/4	4/6
20 x 0,90	3/4 x 0,035					V-POS
27 x 0,90	11/16 x 0,035			V-POS	V-POS	V-POS
34 x 1,10	13/8 x 0,042			V-POS	V-POS	V-POS
41 x 1,30	13/8 x 0,050		V-POS	V-POS	V-POS	V-POS
54 x 1,30	21/8 x 0,050		V-POS	V-POS	V-POS	V-POS
54 x 1,60	21/8 x 0,063		V-POS	V-POS	V-POS	V-POS
67 x 1,60	25/8 x 0,063	V-POS	V-POS	V-POS	V-POS

Legend: V-POS - variable teeth with positive rake angle

нагоре

M 42 PROFILE

band saw blade for smooth tubes cutting

	Употреба: tubes, beams and profiles cutting non- ferrous metals single and bundle cuts carbon and alloyed steels heavy wall tubes Характеристика: tooth tops from material HSS M42, DIN 1.3247 variable teeth with slightly positive rake angle with a special group-set hardness up to 68 HRC	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	2/3	3/4	4/6	5/7	8/11
20 x 0,90	3/4 x 0,035				V-POS	V-POS
27 x 0,90	11/16 x 0,035		V-POS	V-POS	V-POS	V-POS
34 x 1,10	13/8 x 0,042	V-POS	V-POS	V-POS	V-POS	V-POS
41 x 1,30	13/8 x 0,050	V-POS	V-POS	V-POS	V-POS	V-POS
54 x 1,30	21/8 x 0,050		V-POS
54 x 1,60	21/8 x 0,063	V-POS	V-POS	V-POS
67 x 1,60	25/8 x 0,063	V-POS	V-POS

Legend: V-POS - variable teeth with positive rake angle

нагоре

M 42 ALUCUT

cutting Aluminium without pinching (wide setting)

УВЕЛИЧИ КАРТИНКАТА	Употреба: wide setting materials that tend to pinching larger sections and heavy wall structurals Характеристика: tooth tops from material HSS M42, DIN 1.3247 this heavy tooth set with positive rake angle avoids blade pinching and cuts larger workpieces with low vibration provides increased productivity and low cost per cut	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	2H	3H	4H	6H	2/3	3/4
10 x 0,90	3/8 x 0,035			H	H
13 x 0,90	1/4 x 0,035		H	H	H
20 x 0,90	3/4 x 0,035		H	H
27 x 0,90	11/16 x 0,035	H	H	H		V-POS	V-POS
34 x 1,10	13/8 x 0,042	H	H			V-POS	V-POS
41 x 1,30	13/8 x 0,050	H	H			V-POS	V-POS

Legend: V-POS - variable teeth with vpositive rake angle

нагоре

M 42 REGULAR

All purpose blade for cutting all dimension of solid steel.

	Употреба: common steel qualities up to 1400 N/mm² tensile strength non ferrous metals cross sections up to approx. 100 mm (4") contour cutting operations Характеристика: tooth tips made of HSS M42 / material no. 1.3247 standard teeth with 0° resp. slightly positive rake angle combined with a standard-raker or wavy set is distinguished to cut short chipping materials and light wall thickness for smooth and burr-free cuts	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	4	6	10	14	18
6 x 0,90	1/4 x 0,035			N	N
10 x 0,90	3/8 x 0,035			N	N
13 x 0,65	1/2 x 0,025			N	N	N
13 x 0,90	1/4 x 0,035		N	N	N
20 x 0,90	3/4 x 0,035	N	N	N	N
27 x 0,90	11/16 x 0,035	N	N	N	N

Legend: N - standard

нагоре

M 42 REGULAR PLUS

ideal for cutting larger solid bars

	Употреба: common steel qualities up to 1400 N/mm² tensile strngth non ferrous metals cross sections over 100 mm (4") Характеристика: tooth tips made of HSS M42 / material no. 1.3247 hook teeth with a positive rake angle combined with a raker-set, for easy tooth penetration and chip formation on larger cross sections cuts long chipping and tough materials without a problem cuts smooth and accurate	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	2	3	4	6
6 x 0,90	1/4 x 0,035				H
10 x 0,90	3/8 x 0,035			H	H
13 x 0,65	1/2 x 0,025			H	H
13 x 0,90	1/4 x 0,035		H	H	H
20 x 0,90	3/4 x 0,035		H	H
27 x 0,90	11/16 x 0,035	H	H	H	H
34 x 1,10	13/8 x 0,042	H	H

Legend: H - hook teeth

нагоре

M 42 PLUSCUT

excellent in cutting tough alloys and difficult materials

	Употреба: long chipping steels stainless steels Titanium base alloys special Bronze Copper alloys Nickel base alloys exotic, difficult to cut alloys solid materials of medium sections Характеристика: tooth tops from material HSS M42, DIN 1.3247 variable tooth with 0° rake angle with a special group-set cuts even lightest sections with less vibrations short chipping materials are cut without a problem band saw for long life and low cost cutting	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	1,4/2	2/3	3/4
34 x 1,10	13/8 x 0,042		V-POS+	V-POS+
41 x 1,30	13/8 x 0,050		V-POS+	V-POS+
54 x 1,60	21/8 x 0,063	V-POS+	V-POS+	V-POS+

Legend: V-POS+ - variable teeth with extremely positive rake angle

нагоре

M 51 MASSIVE PROFI

extra durable teeth for cutting tough steel types and alloyed metals of medium dimensions

	Употреба: steels up to 1700 N/mm² tensile strength authentic stainless steels nickle-based alloys Titanum and special bronzes solid material of medium dimensions heavy wall tubing Характеристика: tooth tops from material HSS M51, DIN 1.3207 positive variable tooth with special strong tooth forms high heat and wear resistance of HSS M51 tooth tips increases band life on all hard and problematic steels	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	2/3	3/4	4/6
27 x 0,90	11/16 x 0,035		V-POS	V-POS
34 x 1,10	13/8 x 0,042	V-POS	V-POS	V-POS
41 x 1,30	13/8 x 0,050	V-POS	V-POS
54 x 1,60	21/8 x 0,063	V-POS

Legend: V-POS - variable teeth with extremely positive rake angle

нагоре

M 51 GRINDCUT

extremely resistant sharpened teeth for toughest steel types and alloys of medium dimensions (borazon ground teeth)

	Употреба: steels up to 1700 N/mm² tensile strength authentic stainless steels nickle-based alloys solid material of medium dimensions Характеристика: precision borazon ground tooth tips made of HSS M51, DIN 1.3207 variable tooth with extremely positive rake angle in connection with the ground tooth geometry and a variable group-set generate a superior chip distribution champfered raker teeth grant excellent band guidance at lowest vibration Tooth tip hardness of approx. HRC 69 increases the life time for better cost-effectiveness	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	2/3	3/4
34 x 1,10	13/8 x 0,042	V-POS+	V-POS+
41 x 1,30	13/8 x 0,050	V-POS+	V-POS+
54 x 1,60	21/8 x 0,063	V-POS+

Legend: V-POS+ - variable teeth with extremely positive rake

нагоре

M 51 TEMPEST

Superior cutting performance for steels and special bronzes of medium and large dimensions (teeth made by pressure grinding)

	Употреба: steels up to 1700 N/mm² tensile strength stainless steels long chipping materials large cross sections cutting Характеристика: tooth tops from material HSS M51, DIN 1.3207 newly designed tooth form with highest performance of quality surface, fully whet ground at a pressure chamber variable teeth with positive rake angle and standard setting designed for large and powerful machine types low vibration, great lifetime, high efficiency	Още информации Консултация относно инструментите Изтегли

Dimensions		Teeth per inch
mm	inch	0,75/1,25	1/1,5	1,4/2	2/3
41 x 1,30	13/8 x 0,050		V-POS	V-POS	V-POS
54 x 1,60	21/8 x 0,063	V-POS	V-POS	V-POS	V-POS
67 x 1,60	25/8 x 0,063	V-POS	V-POS	V-POS	V-POS

Legend: V-POS - variable teeth with positive rake angle

нагоре

Преглед на асортимента

Инструменти за рязане

Отрезни Ленти

Листове за ножовки

Циркулярни триони с ЗТП

Рязане на не железни метали и пластмаси

KOНTAKT

Контактна информация

Биметални Отрезни Ленти

M 42 UNIVERSAL

Още информации

M 42 MASSIVE

Още информации

M 42 PROFILE

Още информации

M 42 ALUCUT

Още информации

M 42 REGULAR

Още информации

M 42 REGULAR PLUS

Още информации

M 42 PLUSCUT

Още информации

M 51 MASSIVE PROFI

Още информации

M 51 GRINDCUT

Още информации

M 51 TEMPEST

Още информации

Инструменти за рязане

Отрезни Ленти

Листове за ножовки

Циркулярни триони с ЗТП

KOНTAKT