Alloy Saw Blades For Wood Cutting

Alloy saw blades for wood cutting are manufactured from carbon steel 75 Cr1 (DIN 1.2003). All saw bodies up to 3mm thickness are hardened to 44 – 48 HRc and bodies over 3mm thickness to 42 – 46 HRc. Saw blades are delivered straightened, tensioned, set and sharpened. Maximum cutting speed marked on each saw blade refer to circumferential speed 60 m/sec for smaller blade thickness and 80 m/sec for bigger blade thickness. It is possible to manufacture any other parameters on request i.e. with different tooth number, tooth geometry etc. It is also possible to rebore all the saw blades according to the customer’s request and supply a reduction ring together.

5309 - 56KV5°

enlarge picture	Characteristic: alloy saw blade with wolf type of tooth geometry negative hook angle 5° alternating bevelled grinding 75° cutting across the grain of soft and hard wood maximum tooth setting – 1/3 blade thickness of the blade on each side	Related information Tooling advice For download

D	b	d	z	m
200	1,2	25	56	0,25
200	1,6	25	56	0,35
250	1,8	25	56	0,63
300	1,6	30	56	0,84
300	2,0	30	56	1,00
350	2,2	30	56	1,55
400	2,0	30	56	1,85
400	2,5	30	56	2,25
450	2,2	30	56	2,55
450	2,8	30	56	3,20
500	2,5	30	56	3,54
500	3,0	30	56	4,25
600	2,8	30	56	5,70
600	3,5	30	56	7,10

Explanation: D-blade diameter (mm), b-body thickness (mm), d-clampe opening diameter (mm), z-number of teeth, m-weight (kg)

It is possible to make saw blades of other parameters if requested by our customer.

top

5310 - 56KV25°

enlarge picture	Characteristic: alloy saw blade with wolf type of tooth geometry positive hook angle cutting along and across the grain of soft and hard wood maximum tooth setting – 1/3 blade thickness of the blade on each side	Related information Tooling advice For download

D	b	d	z	m
200	1,2	25	56	0,25
200	1,6	25	56	0,35
250	1,6	25	56	0,55
250	1,8	25	56	0,63
250	2,2	25	56	0,78
300	1,6	30	56	0,84
300	1,8	30	56	0,90
300	2,0	30	56	1,00
300	2,4	30	56	1,22
350	1,8	30	56	1,25
350	2,2	30	56	1,55
350	2,8	30	56	1,94
400	2,0	30	56	1,85
400	2,5	30	56	2,25
400	3,0	30	56	2,71
450	2,0	30	56	2,29
450	2,2	30	56	2,55
450	2,8	30	56	3,20
450	3,5	30	56	4,00
500	2,2	30	56	3,11
500	2,5	30	56	3,54
500	3,0	30	56	4,25
500	3,5	30	56	4,95
550	2,2	30	56	3,76
550	2,5	30	56	4,30
550	3,0	30	56	5,20
550	3,5	30	56	6,00
600	2,8	30	56	5,70
600	3,5	30	56	7,10
600	4,0	30	56	8,15
700	3,2	35	56	8,90
700	3,5	35	56	9,7
700	4,0	35	56	11,1
800	3,5	40	56	12,70
800	4,0	40	56	14,50
900	4,5	50	56	20,60
1000	5,0	50	56	28,30

Explanation: D-blade diameter (mm), b-body thickness (mm), d-clampe opening diameter (mm), z-number of teeth, m-weight (kg)

It is possible to make saw blades of other parameters if requested by our customer.

top

5312 - 80NV25°

enlarge picture	Characteristic: alloy saw blade with triangle fine tooth geometry positive hook angle 25° cutting soft and hard wood of smaller thickness maximum tooth pitch – 1/3 blade thickness of the blade on each side	Related information Tooling advice For download

D	b	d	z	m
200	1,2	25	80	0,22
200	1,6	25	80	0,39
250	1,6	25	80	0,42
250	1,8	25	80	0,48
250	2,0	30	80	0,54
300	1,6	30	80	0,84
300	1,8	30	80	0,95
300	2,0	30	80	1,04
350	1,8	30	80	1,28
350	2,2	30	80	1,57
350	2,8	30	80	2,02
400	2,0	30	80	1,89
400	2,5	30	80	2,20
450	2,2	30	80	2,57
450	2,8	30	80	3,16
500	2,5	30	80	3,54
500	3,0	30	80	4,25
550	2,5	30	80	4,46
550	3,0	30	80	5,35
600	2,8	30	80	5,94
600	3,5	30	80	7,10

Explanation: D-blade diameter (mm), b-body thickness (mm), d-clampe opening diameter (mm), z-number of teeth, m-weight (kg)

It is possible to make saw blades of other parameters if requested by our customer.

top

5314 - NV

enlarge picture	Characteristic: alloy saw blade with triangle fine tooth geometry hook angle 0° – 10° cutting along and across the grain of thin wood and plastics maximum tooth setting – 1/3 blade thickness of the blade on each side	Related information Tooling advice For download

D	b	d	γ	z	m
80	0,9	10	0°	90	0,04
100	0,9	10	0°	90	0,06
120	0,9	16	0°	90	0,08
140	1,0	16	15°	60	0,08
140	1,0	16	0°	120	0,08
200	1,8	25	8°	100	0,42
250	1,8	25	8°	120	0,60
300	1,8	30	10°	140	0,97
350	1,8	30	10°	140	1,30
400	2,0	30	10°	140	1,90

Explanation: D-blade diameter (mm), b-body thickness (mm), d-clampe opening diameter (mm), z-number of teeth, m-weight (kg)

It is possible to make saw blades of other parameters if requested by our customer.

top

5311 - 36KV36°

enlarge picture	Characteristic: alloy saw blade with wolf tooth geometry positive hook angle 36° rip saw blades are designed for cutting along the grain of soft and hard wood saw blades are also suitable for multi-rip machines maximum tooth setting – 1/3 blade thickness of the blade on each side	Related information Tooling advice For download

D	b	d	z	m
200	1,6	30	36	0,38
250	1,8	30	36	0,66
250	2,2	30	36	0,81
300	2,0	30	36	1,04
300	2,4	30	36	1,27
300	3,0	30	36	1,60
350	2,2	30	36	1,60
350	2,8	30	36	2,00
350	3,2	30	36	2,30
350	3,5	30	36	2,53
400	2,0	30	36	1,90
400	2,5	30	36	2,30
400	3,0	30	36	2,60
400	3,5	30	36	3,30
450	2,8	30	36	3,20
450	3,5	30	36	4,18
500	3,0	30	36	4,41
500	3,5	30	36	5,15
550	3,0	30	36	5,35
600	3,5	30	36	7,42
600	4,0	30	36	8,50

Explanation: D-blade diameter (mm), b-body thickness (mm), d-clampe opening diameter (mm), z-number of teeth, m-weight (kg)

It is possible to make saw blades of other parameters if requested by our customer.

top

5311 A With Reduced Number of Teeth for Multirip Machines

enlarge picture	Characteristic: Changes to central bores, wedge-shaped, clearing and cooling grooves are subsequently laser-burnt into the saw machines as per customer’s request. These saws are tempered during the production process. The tempering reduces undesirable tension in the saw machines and thus allows their use in the most demanding conditions. For this treatment, a blue/black hue of the saw is typical. The teeth number reduction leads to better cutting performance of the saw blade. It does not get jammed with material chips. Therefore, it does not overheat.	Related information Tooling advice For download

D	b	d	z	h_max	d_{p max}	m
250	2,2	30-80	18	55	120
250	2,2	30-80	24	55	120
300	2,4	30-80	18	75	120
300	2,4	30-80	24	75	120
300	3,0	30-80	18	75	120
300	3,0	30-80	24	75	120
350	2,8	30-80	18	85	140
350	2,8	30-80	24	85	140
350	3,2	30-80	18	85	140
350	3,2	30-80	24	85	140
350	3,5	30-80	18	85	140
350	3,5	30-80	24	85	140
400	2,5	30-80	24	100	170
400	3,0	30-80	24	100	170
400	3,5	30-80	24	100	170
450	2,8	30-80	24	120	170
450	3,5	30-80	24	120	170
500	3,0	30-80	28	140	170
500	3,5	30-80	28	140	170

Explanation: D-blade diameter (mm), b-body thickness (mm), d-clampe opening diameter (mm), z-number of teeth, h_max-maximum cut height [mm], d_{p max}-maximum bore diameter [mm], m-weight (kg)

It is possible to make saw blades of other parameters if requested by our customer.

top

5333 - 40KV25H

enlarge picture	Characteristic: saw blade type "HANIBAL" with group setting for ripping positive hook angle 25° cutting along the grain of soft and hard wood, round timber logs maximum tooth setting – 1/3 blade thickness of the blade on each side recommended only for mechanical feed	Related information Tooling advice For download

D	b	d	z	m
400	3,0	30	8 x 5	2,50
450	2,8	30	8 x 5	3,80
500	3,0	30	8 x 5	4,50
500	3,5	30	8 x 5	5,00
550	3,0	30	8 x 5	5,00
600	3,5	30	8 x 5	7,40
600	4,0	30	8 x 5	8,00
700	3,5	35	8 x 5	9,30
700	4,0	35	8 x 5	10,70
800	3,5	40	8 x 5	14,00
800	4,0	40	8 x 5	15,40
800	4,5	40	8 x 5	16,80
900	4,5	50	8 x 5	19,00
1000	5,0	50	8 x 5	30,00