BiMetal Band Saw Blades

 

M 42 UNIVERSAL

professional for thin and medium wall thickness

BiMetal Band Saw Blades - M 42 UNIVERSAL
enlarge picture
Usage:
  • Profiles with thin or medium wall thickness
  • Short-chipping material
  • profiles of non- ferrous metals
  • single and bundle cuts
  • tubes and structurals with light or medium walls
  • sheet metal on vertical band saw machines
Characteristic:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable TPI with 0° rake angle with a special group-set cuts even lightest sections with less vibrations
  • short chipping materials are cut without a problem
  • long life and low cost cutting

Related information


DimensionsTeeth per inch
mminch5/86/108/1210/14
6 x 0,901/4 x 0,035   V-O
10 x 0,903/8 x 0,035   V-O
13 x 0,651/2 x 0,025 V-OV-OV-O
13 x 0,901/4 x 0,035 V-OV-OV-O
20 x 0,903/4 x 0,035V-OV-OV-OV-O
27 x 0,9011/16 x 0,035V-OV-OV-OV-O
34 x 1,1013/8 x 0,042V-OV-OV-OV-O
41 x 1,3013/8 x 0,50V-OV-O  
Legend: V-O - variable teeth


M 42 MASSIVE

strong in cutting medium and large sections

BiMetal Band Saw Blades - M 42 MASSIVE
enlarge picture
Usage:
  • common steel qualities up to 1400 N/mm2
  • non- ferrous metals
  • single and bundle cuts
  • solid material of medium to large dimensions
  • heavy wall tubes
Characteristic:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable teeth with a positive rake angle with a special group-set cut solid materials as well as heavy wall structurals and tubing at fast cutting rates, with a smooth surface
  • hardness up to 68 HRC

Related information


DimensionsTeeth per inch
mminch0,75/1,251/22/33/44/6
20 x 0,903/4 x 0,035    V-POS
27 x 0,9011/16 x 0,035  V-POSV-POSV-POS
34 x 1,1013/8 x 0,042  V-POSV-POSV-POS
41 x 1,3013/8 x 0,050 V-POSV-POSV-POSV-POS
54 x 1,3021/8 x 0,050 V-POSV-POSV-POSV-POS
54 x 1,6021/8 x 0,063 V-POSV-POSV-POSV-POS
67 x 1,6025/8 x 0,063V-POSV-POSV-POSV-POS 
Legend: V-POS - variable teeth with positive rake angle


M 42 PROFILE

band saw blade for smooth tubes cutting

BiMetal Band Saw Blades - M 42 PROFILE
Usage:
  • tubes, beams and profiles cutting
  • non- ferrous metals
  • single and bundle cuts
  • carbon and alloyed steels
  • heavy wall tubes
Characteristic:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable teeth with slightly positive rake angle with a special group-set
  • hardness up to 68 HRC

Related information


DimensionsTeeth per inch
mminch2/33/44/65/78/11
20 x 0,903/4 x 0,035   V-POSV-POS
27 x 0,9011/16 x 0,035 V-POSV-POSV-POSV-POS
34 x 1,1013/8 x 0,042V-POSV-POSV-POSV-POSV-POS
41 x 1,3013/8 x 0,050V-POSV-POSV-POSV-POSV-POS
54 x 1,3021/8 x 0,050 V-POS   
54 x 1,6021/8 x 0,063V-POSV-POSV-POS  
67 x 1,6025/8 x 0,063V-POSV-POS   
Legend: V-POS - variable teeth with positive rake angle


M 42 ALUCUT

cutting Aluminium without pinching (wide setting)

BiMetal Band Saw Blades - M 42 ALUCUT
enlarge picture
Usage:
  • wide setting
  • materials that tend to pinching
  • larger sections and heavy wall structurals
Characteristic:
  • tooth tops from material HSS M42, DIN 1.3247
  • this heavy tooth set with positive rake angle avoids blade pinching and cuts larger workpieces with low vibration
  • provides increased productivity and low cost per cut

Related information


DimensionsTeeth per inch
mminch2H3H4H6H2/33/4
10 x 0,903/8 x 0,035  HH  
13 x 0,901/4 x 0,035 HHH  
20 x 0,903/4 x 0,035 HH   
27 x 0,9011/16 x 0,035HHH V-POSV-POS
34 x 1,1013/8 x 0,042HH  V-POSV-POS
41 x 1,3013/8 x 0,050HH  V-POSV-POS
Legend: V-POS - variable teeth with vpositive rake angle


M 42 REGULAR

All purpose blade for cutting all dimension of solid steel.

BiMetal Band Saw Blades - M 42 REGULAR
Usage:
  • common steel qualities up to 1400 N/mm2 tensile strength
  • non ferrous metals
  • cross sections up to approx. 100 mm (4")
  • contour cutting operations
Characteristic:
  • tooth tips made of HSS M42 / material no. 1.3247
  • standard teeth with 0° resp. slightly positive rake angle combined with a standard-raker or wavy set is distinguished to cut short chipping materials and light wall thickness
  • for smooth and burr-free cuts

Related information


DimensionsTeeth per inch
mminch46101418
6 x 0,901/4 x 0,035  NN 
10 x 0,903/8 x 0,035  NN 
13 x 0,651/2 x 0,025  NNN
13 x 0,901/4 x 0,035 NNN 
20 x 0,903/4 x 0,035NNNN 
27 x 0,9011/16 x 0,035NNNN 
Legend: N - standard


M 42 REGULAR PLUS

ideal for cutting larger solid bars

BiMetal Band Saw Blades - M 42 REGULAR PLUS
Usage:
  • common steel qualities up to 1400 N/mm2 tensile strngth
  • non ferrous metals
  • cross sections over 100 mm (4")
Characteristic:
  • tooth tips made of HSS M42 / material no. 1.3247
  • hook teeth with a positive rake angle combined with a raker-set, for easy tooth penetration and chip formation on larger cross sections
  • cuts long chipping and tough materials without a problem
  • cuts smooth and accurate

Related information


DimensionsTeeth per inch
mminch2346
6 x 0,901/4 x 0,035   H
10 x 0,903/8 x 0,035  HH
13 x 0,651/2 x 0,025  HH
13 x 0,901/4 x 0,035 HHH
20 x 0,903/4 x 0,035 HH 
27 x 0,9011/16 x 0,035HHHH
34 x 1,1013/8 x 0,042HH  
Legend: H - hook teeth


M 42 PLUSCUT

excellent in cutting tough alloys and difficult materials

BiMetal Band Saw Blades - M 42 PLUSCUT
Usage:
  • long chipping steels
  • stainless steels
  • Titanium base alloys
  • special Bronze
  • Copper alloys
  • Nickel base alloys
  • exotic, difficult to cut alloys
  • solid materials of medium sections
Characteristic:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable tooth with 0° rake angle with a special group-set cuts even lightest sections with less vibrations
  • short chipping materials are cut without a problem
  • band saw for long life and low cost cutting

Related information


DimensionsTeeth per inch
mminch1,4/22/33/4
34 x 1,1013/8 x 0,042 V-POS+V-POS+
41 x 1,3013/8 x 0,050 V-POS+V-POS+
54 x 1,6021/8 x 0,063V-POS+V-POS+V-POS+
Legend: V-POS+ - variable teeth with extremely positive rake angle


M 51 MASSIVE PROFI

extra durable teeth for cutting tough steel types and alloyed metals of medium dimensions

BiMetal Band Saw Blades - M 51 MASSIVE PROFI
Usage:
  • steels up to 1700 N/mm2 tensile strength
  • authentic stainless steels
  • nickle-based alloys
  • Titanum and special bronzes
  • solid material of medium dimensions
  • heavy wall tubing
Characteristic:
  • tooth tops from material HSS M51, DIN 1.3207
  • positive variable tooth with special strong tooth forms
  • high heat and wear resistance of HSS M51 tooth tips increases band life on all hard and problematic steels

Related information


DimensionsTeeth per inch
mminch2/33/44/6
27 x 0,9011/16 x 0,035 V-POSV-POS
34 x 1,1013/8 x 0,042V-POSV-POSV-POS
41 x 1,3013/8 x 0,050V-POSV-POS 
54 x 1,6021/8 x 0,063V-POS  
Legend: V-POS - variable teeth with extremely positive rake angle


M 51 GRINDCUT

extremely resistant sharpened teeth for toughest steel types and alloys of medium dimensions (borazon ground teeth)

BiMetal Band Saw Blades - M 51 GRINDCUT
Usage:
  • steels up to 1700 N/mm2 tensile strength
  • authentic stainless steels
  • nickle-based alloys
  • solid material of medium dimensions
Characteristic:
  • precision borazon ground tooth tips made of HSS M51, DIN 1.3207
  • variable tooth with extremely positive rake angle in connection with the ground tooth geometry and a variable group-set generate a superior chip distribution
  • champfered raker teeth grant excellent band guidance at lowest vibration
  • Tooth tip hardness of approx. HRC 69 increases the life time for better cost-effectiveness

Related information


DimensionsTeeth per inch
mminch2/33/4
34 x 1,1013/8 x 0,042V-POS+V-POS+
41 x 1,3013/8 x 0,050V-POS+V-POS+
54 x 1,6021/8 x 0,063V-POS+ 
Legend: V-POS+ - variable teeth with extremely positive rake
 



M 51 TEMPEST

Superior cutting performance for steels and special bronzes of medium and large dimensions (teeth made by pressure grinding)

BiMetal Band Saw Blades - M 51 TEMPEST
Usage:
  • steels up to 1700 N/mm2 tensile strength
  • stainless steels
  • long chipping materials
  • large cross sections cutting
Characteristic:
  • tooth tops from material HSS M51, DIN 1.3207
  • newly designed tooth form with highest performance of quality surface, fully whet ground at a pressure chamber
  • variable teeth with positive rake angle and standard setting
  • designed for large and powerful machine types
  • low vibration, great lifetime, high efficiency

Related information


DimensionsTeeth per inch
mminch0,75/1,251/1,51,4/22/3
41 x 1,3013/8 x 0,050 V-POSV-POSV-POS
54 x 1,6021/8 x 0,063V-POSV-POSV-POSV-POS
67 x 1,6025/8 x 0,063V-POSV-POSV-POSV-POS
Legend: V-POS - variable teeth with positive rake angle

 
 


© 2006-2017 PILANA a.s.,
All rights reserved
Nadrazni 804, 768 24 Hulin, Czech Republic
Tel.: +420 573 328 200, fax: +420 573 328 140, e-mail:
DNV certifications ISO 9001:2000 Topinfo CMS