Diamond Shank Cutters / Diamond Tools Servicing

Type "Ekonom" "TURBO"
Advantages Low purchase cost Maximum performance
Width of diamond cutting edge 2,8 mm 4 mm
Use CNC machines CNC machines
Max. feed speed 2 m/min 30 m/min
Number of permitted re-sharpening procedures 4 – 6 9 – 11
Processed material MDF, laminated chipboards MDF, laminated chipboards

Diamond Shank Milling Cutter 'Ekonom' – Dimensional Series

Diamond Shank Cutters / Diamond Tools Servicing - Diamond Shank Milling Cutter 'Ekonom' – Dimensional Series
enlarge picture
Number D (mm) L1 (mm) L (mm) dxL2 (mm) Z Stock
P2001225/1 12 25.4 70 12x35 1+1 yes
P2001235/1 12 35 90 16x45 1+1 no
P2001625/1 16 25.4 85 16x45 1+1 no
P2001635/1 16 35 95 16x45 1+1 no
P2001843/1 18 43 100 16x45 1+1 no
P2001835/20 18 35 105 20x55 1+1 no
P2001843/20 18 43 100 20x55 1+1 no
P2001835/2 18 35 105 25x55 1+1 yes
P2001843/2 18 43 110 25x55 1+1 yes
P3001835/20 18 35 100 20x55 2+1 yes
P3001825/20 18 25 100 20x55 2+1 yes

Related information


In case that you did not find the type of diamond shank milling cutter which you require in our catalogue, please contact us. We will make them upon your specification.

Diamond Shank Cutters / Diamond Tools Servicing


Diamond Shank Milling Cutter 'TURBO' – Dimensional Series

Number D (mm) L1 (mm) L (mm) dxL2 (mm) Z Stock
1. 20 25 85 20x50 3 no
2. 20 25 95 25x55 3 no
3. 20 33 95 20x50 3 no
4. 20 33 100 25x55 3 no
5. 25 25 100 25x55 3 no
6. 25 33 105 25x55 3 no
7. 25 45 115 25x55 3 no
8. 25 52 120 25x55 3 no

Related information


In case that you did not find the type of diamond shank milling cutter which you require in our catalogue, please contact us. We will make them upon your specification.

Diamond Shank Cutters / Diamond Tools Servicing


Servicing Diamond Tools

Diamond Shank Cutters / Diamond Tools Servicing - Servicing Diamond Tools
enlarge picture

We sharpen and replace diamond tips for the following Diamond tools:

  • Circular saw blades
  • Diamond Shank milling cutters
  • Cylindrical cutters
  • Hogging segments

We use precision optical devices to measure the parameters of individual cutting tips. This allows us to sharpen the tools so that they comply with the factory specified cutting parameters. Therefore, there is no need for concern that the cutting performance or the quality of the processed surface might be decreased due to incorrect sharpening. A top-of-the-range sharpening centre of the Vollmer company ensures that the cutting edges of your tools are sharpened with minimum reduction of the diamond tip width.

Related information



 
 


© 2006-2017 PILANA a.s.,
All rights reserved
Nadrazni 804, 768 24 Hulin, Czech Republic
Tel.: +420 573 328 200, fax: +420 573 328 140, e-mail:
DNV certifications ISO 9001:2000 Topinfo CMS