Instructions How To Use Saw Blades Correctly


Pict. No. 1


Pict. No. 2


Pict. No. 3


Pict. No. 4

We recommend to follow the below rules in order to reach the best cutting results:

  • Machine must be in good condition without vibrations
     
  • Flanges used to tighten the saw blades must be of the same diameter (about1/3 of the blade size)
     
  • Flanges must be clean and it is important to check their side run – out
     
  • Check the spindle of machine. It must be absolutely straight (picture 1)
     
  • Tips must always be sharpened with the original angles
     
  • See the most appropriate way on picture 2
     
  • If rebored by over 20mm, the blade loses its original attributes and its stability (picture 3)
     
  • It is needed to grind the top of chip limiters together with tip grinding and keep the oversize as picture 4
 
 


© 2006-2017 PILANA a.s.,
All rights reserved
Nadrazni 804, 768 24 Hulin, Czech Republic
Tel.: +420 573 328 200, fax: +420 573 328 140, e-mail:
DNV certifications ISO 9001:2000 Topinfo CMS