Machine Gang Saw Blades for Rip Cutting

Usage:
  • For cutting soft and hard woods.
  • While cutting with wolf teeth geometry you can reach more precise geometrical accuracy of cutting material.
  • While cutting with triangular tooth geometry you can reach better surface quality – suitable for small diameter of logs.
Modification: Machine gang saw blades are delivered in straightened and tensioned stage.

Termination: Standard gang saw blades are delivered with hardened guide gibs of 35, 30, 25 mm width, with straight punching (Esterer hanges) and also blades without guide gibs.

5360.1 (KV, NV)   Machine Gang Saw Blades for Rip Cutting – Wolf and Triangular Type of Teeth

Machine Gang Saw Blades for Rip Cutting - Machine Gang Saw Blades for Rip Cutting – Wolf and Triangular Type of Teeth 5360.1 (KV, NV)
enlarge picture

Related information

Dimensions
(mm)		tooth pitch
140 x 1,822, 25, 26, 30
140 x 2,022, 25, 26, 30
140 x 2,222, 25, 26, 30
160 x 2,022, 25, 26, 30
160 x 2,222, 25, 26 ,30
180 x 2,222, 25, 26, 30
180 x 2,422, 25, 26, 30

Gang saw blades are manufactured from material 75Cr1 (DIN 1.2003) with hardness 48 +/ – 2Hrc. We can also produce gang saws coated with hard-chrome (surface of 10, 15 and 20microns). Hardchrome surface improves the resistance against tool wear and does not tend to slow down when in contact with steel. It is also resistant against high temperatures and protects against rust.

We are able to manufacture also other types of toothing (tooth pitch, shape) together with other types of guide gibs and pinholes on the request of our customers.

Machine Gang Saw Blades for Rip Cutting Machine Gang Saw Blades for Rip Cutting

top

 
 

© 2006-2010 PILANA TOOLS a.s.,
All rights reserved Nadrazni 804, 768 24 Hulin, Czech Republic
Tel.: +420 573 328 200, fax: +420 573 328 140, e-mail: DNV certifications ISO 9001:2000 Topinfo CMS