Machine Gang Saw Blades Stelitte – Tipped
|
Usage: Hard and soft woods. It is needed to know while ordering.
Modification: Gang saw blades are delivered straightened and tensioned.
Termination: Standard gang saw blades are delivered with hardened guide gibs of 35, 30, 25 mm width, with straight punching (Esterer hanges) and also blades without guide gibs.
|
5366.1 (KV) Machine Gang Saw Blades Stelitte – Tipped - Wolf Type of Teeth
 enlarge picture |
Related information |
| Dimensions (mm) | tooth pitch |
| 140 x 1,8 | 22, 25, 26, 30 |
| 140 x 2,0 | 22, 25, 26, 30 |
| 140 x 2,2 | 22, 25, 26, 30 |
| 160 x 2,0 | 22, 25, 26, 30 |
| 160 x 2,2 | 22, 25, 26, 30 |
| 180 x 2,2 | 22, 25, 26, 30 |
| 180 x 2,4 | 22, 25, 26, 30 |
Gang saw blades are manufactured from material 75Cr1 (DIN 1.2003) with hardness 48 +/ – 2Hrc. Welding and stelitte grinding is performed on Vollmer machines.
Main advantages of stelitte-tipped gang saws:- Long life – time of tips (5 – 10 x more than normal version).
- Lower energy intensiveness while cutting.
- Lower tendency to tip damage due to dirt (compared TCT tools).
- Higher surface quality of cutting material.
- Higher dimensional and formal accuracy of cutting material.
- Possibility to adjust tip geometry to particular cutting conditions (machine type, type of cutting material, cutting conditions etc.).
- Due to higher cutting power enable lower thermal cutting stress of tip.
- Possibility to re-tip the tool after grinding off the whole layer of previous welding (after 15 – 20 sharpening).
- Minimizing the stand-time when changing the dull tools in machines.
- Increasing the cutting performance by faster feed speed when tampered gang saws are replaced with stelitte – tipped.
Gang saw blades are manufactured with tooth number and side finish according to our general types or to customer’s requirements. We are able to manufacture also other types of toothing (tooth pitch, shape) together with other types of guide gibs and pinholes on the request of our customers.
We can provide service of all gang saw blades with tooth pitch 26 and 30 mm.
