Standard Gibs for Gang Saw Blades

Type Picture Specifications
L118x25 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 5 spacing 25 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 140 mm width
L138x25 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 5 spacing 25 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 160 mm width
L158x25 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 6 spacing 25 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 180 mm width
L118x30 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 9 spacing 25/25 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 140 mm width
L138x30 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 9 spacing 25/25 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 160 mm width
L158x30 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 9 spacing 25/50 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 180 mm width
L98x35 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 7 spacing 25/25 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 120 mm width
L118x35 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 9 spacing 25/25 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 140 mm width
L138x35 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 9 spacing 25/25 mm
Bevel: 60
Hardness: 36±2 HRc

Standard use for: gang saws of 160 mm width
L158x35 Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 9 spacing 25/50 mm
Bevel: 60
Hardness: 36±2 HRc
Standard use for: gang saws of 180 mm width
L95x35
Lipowski
Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 7 spacing 25/25 mm
Bevel: 60, radius R∼600
Hardness: 36±2 HRc

Standard use for: Various types
L118x25
OZUB T3
Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 5 spacing 25 mm
Bevel: No, toothing type 3
Hardness: 36±2 HRc

Standard use for: gang saws of 140 mm width
L138x25
OZUB T3
Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 5 spacing 25 mm
Bevel: No, toothing type 3
Hardness: 36±2 HRc

Standard use for: gang saws of 160 mm width
L138x30
3xOT6
Standard Gibs for Gang Saw Blades Thickness: 2,9 mm
Pinholes: 9 spacing 22/22 mm
3 + 13 mm
Bevel: 60

Standard use for: gang saws of 160 mm width

Other types of fixing gib designs (atypical designs for extra charge)

  • gibs with no bevel
  • arched gibs (radius R~600 mm, different external dimension than the dimensions specified in the chart above)
  • gibs with toothing (different from the above specified)
  • divided gibs (gib is divided in an asymmetric or symmetric manner into 2 or more parts)

Saw blades with no gibs

  • with straight pinholes (perforation) suitable for the Esterer, Jansen, ASS hangs - holes of 8.3 diameter, spacing 17 millimetres
  • with atypical holes based on customer's specifications
  • gang saw blades with no perforation
 
 


© 2006-2017 PILANA a.s.,
All rights reserved
Nadrazni 804, 768 24 Hulin, Czech Republic
Tel.: +420 573 328 200, fax: +420 573 328 140, e-mail:
DNV certifications ISO 9001:2000 Topinfo CMS