Bandes de scie bimétal

 

M 42 - 420 MASSIVE Expert

All purpose blade for cutting all dimension of solid steel.

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • common steel qualities up to 1400 N/mm2 tensile strength
  • non ferrous metals
  • cross sections up to approx. 100 mm (4")
  • contour cutting operations
Caractéristiques:
  • tooth tips made of HSS M42 / material no. 1.3247
  • standard teeth with 0° resp. slightly positive rake angle combined with a standard-raker or wavy set is distinguished to cut short chipping materials and light wall thickness
  • for smooth and burr-free cuts

DimensionsTeeth per inch
mminch468101418
6 x 0,901/4 x 0,035   NN 
10 x 0,903/8 x 0,035  NNN 
13 x 0,651/2 x 0,025   NNN
13 x 0,901/4 x 0,035 N NN 
20 x 0,903/4 x 0,035NNNNN 
27 x 0,9011/16 x 0,035NNNNN 
34 x 1,1013/8 x 0,042NN    
41 x 1,3013/8 x 0,050NN    
Legend: N - standard


M 42 - 421 MASSIVE Expert Plus

ideal for cutting larger solid bars

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • common steel qualities up to 1400 N/mm2 tensile strngth
  • non ferrous metals
  • cross sections over 100 mm (4")
Caractéristiques:
  • tooth tips made of HSS M42 / material no. 1.3247
  • hook teeth with a positive rake angle combined with a raker-set, for easy tooth penetration and chip formation on larger cross sections
  • cuts long chipping and tough materials without a problem
  • cuts smooth and accurate

DimensionsTeeth per inch
mminch1,252346
6 x 0,901/4 x 0,035    H
10 x 0,903/8 x 0,035   HH
13 x 0,651/2 x 0,025   HH
13 x 0,901/4 x 0,035  HHH
20 x 0,903/4 x 0,035  HH 
27 x 0,9011/16 x 0,035 HHHH
34 x 1,1013/8 x 0,042HHH  
41 x 1,3013/8 x 0,050HHH  
54 x 1,3021/8 x 0,050HHH  
54 x 1,6021/8 x 0,063HHH  
67 x 1,6025/8 x 0,063HHH  
80 x 1,6031/8 x 0,063HHH  
Legend: H - hook teeth


M 42 – 427 MASSIVE Master

excellent in cutting special alloys and materials difficult to machine (borazon-ground teeth)

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • stainless steels
  • heat resistant steels
  • heat resistant steels
  • heat resistant steels
Caractéristiques:
  • precision borazon-ground tooth tips made of HSS M 42 / material no. 1.3247
  • hook teeth with ground triple chip geometry, positive rake angle and standard-raker-set for perfectly divided chips
  • bevelled roughing teeth provide excellent guidance of saw blade
  • sharpest cutting edges grant fast cutting rates and great cutting accuracy

DimensionsTeeth per inch
mminch1,2523
27 x 0,9011/16 x 0,035  H
34 x 1,1013/8 x 0,042 HH
41 x 1,3013/8 x 0,050HHH
54 x 1,3021/8 x 0,050HHH
54 x 1,6021/8 x 0,063HHH
67 x 1,6025/8 x 0,063H  
Legend: H - hook teeth
Bandes de scie bimétal



M 42 – 430 Expert

basic - professional for thin and medium wall thickness

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • common steel qualities up to 1400 N/mm2 tensile strength
  • profiles of non- ferrous metals
  • single and bundle cuts
  • tubes and structurals with light or medium walls
  • sheet metal on vertical band saw machines
Caractéristiques:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable tooth with 0° rake angle with a special group-set cuts even lightest sections with less vibrations
  • short chipping materials are cut without a problem
  • long life and low cost cutting

DimensionsTeeth per inch
mminch3/44/65/86/108/1210/14
6 x 0,901/4 x 0,035     V-O
10 x 0,903/8 x 0,035     V-O
13 x 0,651/2 x 0,025   V-OV-OV-O
13 x 0,901/4 x 0,035   V-OV-OV-O
20 x 0,903/4 x 0,035 V-OV-OV-OV-OV-O
27 x 0,9011/16 x 0,035V-OV-OV-OV-OV-OV-O
34 x 1,1013/8 x 0,042V-OV-OV-OV-OV-OV-O
41 x 1,3013/8 x 0,50V-OV-OV-OV-O  
54 x 1,3021/8 x 0,050V-OV-O    
54 x 1,6021/8 x 0,063V-OV-O    
Legend: V-O - variable teeth


M 42 – 431 Expert Plus

strong in cutting medium and large sections

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • common steel qualities up to 1400 N/mm2
  • non- ferrous metals
  • single and bundle cuts
  • solid material of medium to large dimensions
  • heavy wall tubes
Caractéristiques:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable teeth with a positive rake angle with a special group-set cut solid materials as well as heavy wall structurals and tubing at fast cutting rates, with a smooth surface

DimensionsTeeth per inch
mminch0,75/1,251/22/33/44/6
20 x 0,903/4 x 0,035    V-POS
27 x 0,9011/16 x 0,035  V-POSV-POSV-POS
34 x 1,1013/8 x 0,042  V-POSV-POSV-POS
41 x 1,3013/8 x 0,050 V-POSV-POSV-POSV-POS
54 x 1,3021/8 x 0,050 V-POSV-POSV-POSV-POS
54 x 1,6021/8 x 0,063 V-POSV-POSV-POSV-POS
67 x 1,6025/8 x 0,063V-POSV-POSV-POSV-POS 
80 x 1,6031/8 x 0,063V-POSV-POSV-POS  
Legend: V-POS - variable teeth with positive rake angle


M 42 – 434 MASSIVE Prominent

excellent in cutting tough alloys and difficult materials

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • long chipping steels
  • stainless steels
  • Titanium base alloys
  • special Bronze
  • Copper alloys
  • Nickel base alloys
  • exotic, difficult to cut alloys
  • solid materials of medium sections
Caractéristiques:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable tooth with 0° rake angle with a special group-set cuts even lightest sections with less vibrations
  • short chipping materials are cut without a problem
  • band saw for long life and low cost cutting

DimensionsTeeth per inch
mminch1,4/22/33/4
34 x 1,1013/8 x 0,042 V-POS+V-POS+
41 x 1,3013/8 x 0,050V-POS+V-POS+V-POS+
54 x 1,3021/8 x 0,050 V-POS+ 
54 x 1,6021/8 x 0,063V-POS+V-POS+V-POS+
Legend: V-POS+ - variable teeth with extremely positive rake angle


M 42 – 436 ALU Master

cutting Aluminium without pinching (wide setting)

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • wide setting
  • materials that tend to pinching
  • larger sections and heavy wall structurals
Caractéristiques:
  • tooth tops from material HSS M42, DIN 1.3247
  • this heavy tooth set with positive rake angle avoids blade pinching and cuts larger workpieces with low vibration
  • provides increased productivity and low cost per cut

DimensionsTeeth per inch
mminch2/33/4
27 x 0,9011/16 x 0,035V-POSV-POS
34 x 1,1013/8 x 0,042V-POSV-POS
41 x 1,3013/8 x 0,050V-POSV-POS
Legend: V-POS - variable teeth with vpositive rake angle


M 42 – 437 MASSIVE Expert Plus

ideal performance in cutting special alloys and materials difficult to machine (borazon-ground variable teeth)

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • stainless steels
  • heat resistant steels
  • Titanium alloys
  • Nickel-based alloys
Caractéristiques:
  • precision borazon-ground tooth tips made of HSS M42 / material no. 1.3247
  • variable teeth with ground multi-chip geometry, positive rake angle and group-set
  • perfectly divided chips and excellent band guidance
  • sharpest cutting edges grant reduced cutting forces and great cutting accuracy

DimensionsTeeth per inch
mminch0,75/1,251/22/33/4
27 x 0,9011/16 x 0,035  V-POSV-POS
34 x 1,1013/8 x 0,042  V-POSV-POS
41 x 1,3013/8 x 0,050 V-POSV-POSV-POS
54 x 1,3021/8 x 0,050  V-POSV-POS
54 x 1,6021/8 x 0,063 V-POSV-POSV-POS
67 x 1,6025/8 x 0,063V-POSV-POSV-POS 
Legend: V-POS - variable teeth with positive rake
Bandes de scie bimétal



M 51 – 531 EXPERT PLUS M 51

extra durable teeth for cutting tough steel types and alloyed metals of medium dimensions

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • steels up to 1700 N/mm2 tensile strength
  • authentic stainless steels
  • nickle-based alloys
  • Titanum and special bronzes
  • solid material of medium dimensions
  • heavy wall tubing
Caractéristiques:
  • tooth tops from material HSS M51, DIN 1.3207
  • positive variable tooth with special strong tooth forms
  • high heat and wear resistance of HSS M51 tooth tips increases band life on all hard and problematic steels

DimensionsTeeth per inch
mminch2/33/44/6
27 x 0,9011/16 x 0,035 V-POSV-POS
34 x 1,1013/8 x 0,042V-POSV-POSV-POS
41 x 1,3013/8 x 0,050V-POSV-POS 
54 x 1,6021/8 x 0,063V-POS  
Legend: V-POS - variable teeth with extremely positive rake angle


M 51 – 537 MASSIVE M 51

extremely resistant sharpened teeth for toughest steel types and alloys of medium dimensions (borazon ground teeth)

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • steels up to 1700 N/mm2 tensile strength
  • authentic stainless steels
  • nickle-based alloys
  • solid material of medium dimensions
Caractéristiques:
  • precision borazon ground tooth tips made of HSS M51, DIN 1.3207
  • variable tooth with extremely positive rake angle in connection with the ground tooth geometry and a variable group-set generate a superior chip distribution
  • champfered raker teeth grant excellent band guidance at lowest vibration
  • Tooth tip hardness of approx. HRC 69 increases the life time for better cost-effectiveness

DimensionsTeeth per inch
mminch2/33/4
34 x 1,1013/8 x 0,042V-POS+V-POS+
41 x 1,3013/8 x 0,050V-POS+V-POS+
54 x 1,6021/8 x 0,063V-POS+ 
Legend: V-POS+ - variable teeth with extremely positive rake
 



M 51 – 544 MASSIVE PLUS M 51

Superior cutting performance for steels and special bronzes of medium and large dimensions (teeth made by pressure grinding)

Bandes de scie bimétal
agrandir l´image
Utilisation:
  • steels up to 1700 N/mm2 tensile strength
  • stainless steels
  • long chipping materials
  • large cross sections cutting
Caractéristiques:
  • tooth tops from material HSS M51, DIN 1.3207
  • newly designed tooth form with highest performance of quality surface, fully whet ground at a pressure chamber
  • variable teeth with positive rake angle and standard setting
  • designed for large and powerful machine types
  • low vibration, great lifetime, high efficiency

DimensionsTeeth per inch
mminch0,75/1,251/1,51,4/22/3
41 x 1,3013/8 x 0,050 V-POSV-POSV-POS
54 x 1,6021/8 x 0,063V-POSV-POSV-POSV-POS
67 x 1,6025/8 x 0,063V-POSV-POSV-POSV-POS
Legend: V-POS - variable teeth with positive rake angle

 
 


© 2006-2017 PILANA a.s.,
All rights reserved
Nadrazni 804, 768 24 Hulin, Czech Republic
Tel.: +420 573 328 200, fax: +420 573 328 140, e-mail:
DNV certifications ISO 9001:2000 Topinfo CMS